Delphi GN10181 Ignition Coil

Brand: Delphi
Item dimensions L x W x H: 5 x 4.5 x 6 inches
Vehicle Service Type: Car
Item Weight: 3.26 Pounds
Connector Gender: Male

Delphi uses winding process techniques to control the length of wire between adjacent windings. That’s important because more length results in greater voltage differences, which in turn create more pressure that could break down the insulation and wire coating.
Delphi’s ignition coils are engineered to Original Equipment specifications
Delphi’s ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
Epoxy vacuum techniques reduce air bubbles in the epoxy, because having fewer air bubbles increases the epoxy’s insulation quality and reduces the chances of energy punch-through failures
Delphi’s coils are designed and endurance tested to resist the common stresses that cause failure

Product information

Brand Name: Delphi
Manufacturer: Delphi
UPC: 689604201206 689604201459
Global Trade Identification Number: 00689604201206, 00689604201459
Item Type Name: Ignition Coil
Included Components: Ignition Coil
Manufacturer Warranty Description:

Delphi warrants the products will be free of defects in materials andworkmanship. Delphi will, as its sole obligation under this limited warranty,replace any non-conforming product. Delphi is not responsible for anyincidental or consequential costs including labor to remove and install aproduct or to restore the vehicle to its proper operating condition. Inaddition, under no circumstances will Delphi be liable for any incidental orconsequential damages under this warranty or any implied warranties.

Call Delphi at: 877-463-3574

Manufacturers’ warranties may not apply in all cases, depending on factors such as use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.

UNSPSC Code: 25170000 Transportation components and systems Report an incorrect code

Where Does Delphi Quality Come From?

100 years of OE engineering and testing built right in? Well, you get it. Delphi has the high quality emissions, ignition and sensor parts to help you keep that pesky check engine light off – and keep your customers happy.

We also have OE-level training and advanced diagnostics, including reset adaption, adjust/reset of the throttle actuator and EGR valve coding.

We utilize the latest OE technology and components to bring exceptional quality and durability to exceed OE requirements.

Our expertise goes back to the beginning and we’re still innovating today. Take our ignition coils for instance – we’ve used 80 years of OE ignition system experience to create unique magnetic design and modeling capabilities.

Delphi Quality for Peak Performance:

Delphi GN10328 Ignition Coil shown

Help ensure fast starts, consistent engine performance and optimized fuel efficiency with Delphi ignition coils. Delphi makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Acura, Ford, GM, Lexus, Mazda, Nissan, Subaru, Toyota and more.

Arguably one of the smartest systems in any modern vehicle, the engine management system is responsible for the entire combustion process – mixing the right amount of fuel to the air entering the engine and igniting the compressed air/fuel mixture in the cylinder. Operating 30 plus components and approximately 50 computer modules to deliver the millions of lines of code that keeps the vehicle running efficiently … more than earning its reputation as the brains of the car.

Tech Tips

Delphi has analyzed the tough environment that ignition coils must withstand and discovered how vibration, temperature changes and even the failure of other components, such as spark plugs, can cause ignition coils to fail.

Specifically, these stresses can cause ignition coil wiring to break or have shorts. The insulation inside the ignition coil could also fail and cause energy to escape. Delphi is combatting these issues with an innovative design and high-quality materials.

We back up our innovative ignition coil design with intelligent manufacturing. Delphi uses winding process techniques to control the length of wire between adjacent windings. That’s important because more length results in greater voltage differences, which in turn create more pressure that could break down the insulation and wire coating.

Delphi ignition coils use an electrostatic paint coating, which results in consistent coil inductance and prevents lamination separation. Delphi backs its proven ignition coil design with proven materials: High quality wires, as well as high quality wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues.

What Tools Will I Need?

Safety glasses and gloves are always recommended. Never smoke or work near anything that could cause a spark or ignite fuel, such as pilot lights or incandescent light bulbs. Work in a well-ventilated area. Keep clean-up materials on hand, and clean up any spills immediately.

Delphi Ignition Coils

Delphi MAF Sensors

Delphi O2 Sensors

Other Engine Management

· Delphi is a supplier of ignition coils to vehicle manufacturer brands globally with over 100 years of experience

· Delphi utilizes our OE expertise to improve performance and provide innovative solutions to our aftermarket program

· Delphi is the first supplier to introduce vented coils in our program for PNs known to build up pressure and pop out of the spark plug well

· Full coverage program containing only new, never remade parts

· More than 30 patents in MAF sensing technology

· Full service solution including advanced diagnostic capability and support

· Delphi developed temperature compensation design for wide-ranging temperature performance

· OE planar technology delivers industries fastest light-off time

· Dual-layer protection shield and special coating protects from contaminants

· Breathable membrane filter improves air supply for optimal functionality

· Water seal offers resistance against high temperatures, vibration and water ingress

· ABS Wheel Speed Sensors: features latest digital signal technology for stability and reliability in all conditions

· Camshaft/Crankshaft Position Sensors: OE engineered for long-lasting sensor protection, accurate readings resulting in optimal engine performance

· Coolant Temperature Sensors: OE fit, form and function for the best possible fuel injection and ignition timing

Ignition Coils

MAF Sensors

O2 Sensors

Other Engine Management Products

Ignition Coils

MAF Sensors

O2 Sensors

Other Engine Management Products